Much has been written concerning the compatibility of numerous brands and types of slot cars working other brands and kinds of tracks. It is fairly well recognized, for example, that almost any analog slot car can work well on a Carrera analog track because Carrera has the largest and deepest slot of the major producers. Alternatively, numerous Carrera cars will not work well, or in any way, on a number of other brand names of track since the guide is simply too wide or strong to suit in some thing like a Scalextric track. While posts have been written regarding the vehicles compatibility, small has become composed about track retaining walls or barriers. This study will look comprehensive at tracks, keeping walls, and obstacles from Carrera, Ninco, and Scalextric, as well as show how well they do, or don’t, work when combining brands.
First of all, let’s begin with Scalextric monitor and barriers, as they are quite probably the most frequently used make of commercially manufactured slot car techniques. Scalextric will make a excellent searching barrier, made from a smooth, flexible plastic material that holds its form well, and can absorb effects of slot car crashes without actual physical harm. These obstacles can connect to Scalextric Sport monitor in several ways- with little black clips that attach right to the bottom of the monitor, or placed into lines and channels especially for these obstacles in the accessory shoulder joint items. While the obstacles do fit well and relatively stiffly in to the black clips, the clips do not remain connected firmly for the monitor without the use of adhesives or any other ways of affixing them inside a more long term style to the Track Fans TV!. Also using a severe effect, either the buffer, or occasionally the entire shoulder area may dislodge from your track. Aesthetically the obstacles are incredibly pleasing, plus they do little harm to the vehicles whilst slowing or halting them. Nevertheless, they often need to be put back in place after incidents.
Carrera at once provided two various kinds of barriers- a single was a smooth, pliable rubber that will slip into clips and attach towards the track, and was obtainable in black or red-colored. These are generally will no longer manufactured. The current Carrera buffer system is made up of red-colored and white striped “candy cane” part of 3mil PVC that slides into firmly fitted vinyl fabric clips that connect to the bottom of the track. The red and white-colored striping matches the pattern found in the boundary and shoulder joint bits of Carrera monitor, and does look suitable on sharp transforms, though significantly less so on straight parts in which a buffer may be warranted, such as a link. Also, the Pvc material tends to become fragile with time, and will break and break with subsequent impacts. In addition, it has almost no pliability, and definately will pick up color off of wayward vehicles. This is likely to put in a realistic turn to the barrier, nevertheless the vehicles will show warning signs of wear. This system does stay firmly attached to the monitor even with severe impacts. The pieces of PVC can even be effortlessly reduce to custom measures, and one piece can be as long as 4 feet, making it possible for a constant look and feel over a long transform. Additionally it is quite easy to generate your personal custom barrier walls by publishing directly to bedding of PVC and reducing it into strips from the proper height. This can enable the roll-out of realistic and fairly long lasting trackside marketing.
Although much less widespread as Carrera and Scalextric, Ninco can make exceptional track and buffer products that are nearly globally acknowledged as the best quality mass manufactured techniques. The monitor has nearly exactly the same size and depth since the Carrera, whilst getting the flexibility and aesthetics in the Scalextric. The obstacles consist of reduced wall surfaces, rock searching wall surfaces, and even a wall structure with a higher fence. The Ninco barriers are of the similar material to the Scalextric types, and soak up effect without having “trading paint”
Now, suppose you have a single brand of monitor, however you would like to make use of an additional brand name for any wall structure or buffer. Fortunately, this is simply not nearly as complicated or difficult a compatibility issue because it is using the vehicles. The elevation in the Carrera PVC strips is identical to the elevation in between the top and base side rails of the Scalextric barrier railings, in fact it is quite simple to get rid of the Carrera candy-cane pieces and replace them with Scalextric guardrails. The Carrera fastening system towards the Carrera monitor is quite safe, and also the railings remain in place as well or much better utilizing the Carrera clips on Carrera monitor as they do using Scalextric clips on Scalextric monitor. Lengths may be a minor issue, however the material trims easily having a power knife. Sadly, if you wish to use the Carrera “chocolate cane” around the Scalextric track, the only way to get it done well is to use an sticky, laying the Carrera strips within the Scalextric shield side rails. Hot glue functions well for this particular, and can be eliminated relatively effortlessly as well.
The Ninco barriers and walls are a one piece system, with all the clips being an element of the wall or barrier area. These affix with ease not only to the Ninco track, but the Carrera and Scalextric. In fact, the Ninco items oyalkf to mount even more snugly using the Scalextric monitor than on the native track. In the Carrera track, the elevation in the track is just somewhat taller than the space between the top and bottom of the Ninco clips. However, it can be produced to fit by trimming the edge of the Carrera track very somewhat, almost unnoticeably across the bottom. Again, the Carrera candy cane can be attached for the Ninco barriers with the use of adhesives.