Do-it-yourself wooden garden storage boxes are a simple method of storing seasonal and temporary items. Wooden storage boxes may be used in the garage, on the patio or in a storage shed to hide seasonal equipment, including patio sets, pool equipment, bikes and machinery. While it is possible to buy a storage box at a hardware store, building a wooden one at home is actually a cheaper alternative and the box can be personalised and custom-built to fit into any space.
Measure the space where the – Garden Storage Box => Storing Things is going to be placed, and take note of the figures for your height, width and depth you require the package to be. Draw the pieces needed for the four sides in the box on the plywood sheets, using a pencil. You will need two side pieces measuring height by depth, and also the front and rear pieces should measure height by width. Eliminate the 4 pieces using the saw. Make use of the sandpaper to make the edges and surfaces smooth and splinter-free.
Arrange one of the side pieces therefore it is perpendicular to the front piece. Both pieces ought to be on end, as well as the end of the side piece should be included in the outer lining side from the front piece. In other words, along side it pieces will likely be attached in the front and back piece ends.
Attach the 2 pieces making use of the drill and at least four screws from the front piece. Attach the second side piece in the same manner to the opposite end of the front piece. Make sure the second side piece’s end is within the front piece. Last, attach your back piece with all the drill and screws, so both ends from the side pieces are covered by this last piece. You ought to will have a rectangular wooden frame.
Look at the rectangular frame’s perimeter. This can provide the measurements for that bottom and lid pieces. Write the measurements down. Transfer the measurements for the plywood, using a pencil. Be sure they’re square, then cut them by helping cover their the saw and sandpaper both pieces.
Attach the base piece by lining it for the wooden frame. Position the level on the box to guarantee the piece is level and also. Attach it with screws placed every 6 inches, drilling the screws from the bottom piece and into comfou four sides. When done, turn it over, so you possess an open box without a lid.
Attach two hinges to the lid piece, screwing those to the underside of one of the long sides. Flip the wooden garden storage box on its side to install the lid properly. Line the lid approximately the box so that the hinges are in the box and attach the hinges using screws and also the screwdriver. Flip the wooden storage box right side up and close the lid.